Keyboard Shortcuts for Aton® Connect™ for Windows Mobile Pocket PC and SmartPhone
For Windows Mobile phones that have a built in keyboard, keyboard shortcuts offer a way to access specific function keys very rapidly. You will find this table in the Help Menu of Aton
Connect for Windows Mobile. We have reproduced it here for your convenience.
Hardware "QWERTY" Keyboard Map
The "QWERTY" style hardware keyboard included on many Windows Mobile devices has less than half the number of keys that you find on a laptop or desktop PC computer. To access all the
letters, digits, and symbols, the typical Windows Mobile QWERTY keyboard includes several shift keys, variously labled Shift, CAPS, Alt, Function, or simply a large dot.
Using these shift keys in combination with one of the other keys provides the ability to input most of the graphics found on a laptop or desktop PC computer keyboard. For Aton Connect terminal
emulation, an additional set of keyboard inputs is required for the various 3270, 5250, and VT-220 terminal functions.
The additional keyboard inputs are generated using two new shift modes unique to Aton Connect. These two shift modes are accessed by using the left soft key. When Aton Connect is in active
connection with a host and displaying the terminal emulation screen, the left soft key is labled "Mode". The left soft key is found directly below the screen on the left side. For
Windows Mobile devices with slide out keyboards, the left soft key is also found on the keyboard, typically labeled with a large dash or hyphen.
When Aton Connect has lost host connection, then the left soft key is labled "Done", and can be used to exit the terminal emulation screen. The "Mode" key will sequentially
move the keyboard shift status from normal/unshifted, to Mode 1 shift, to Mode 2 shift, and finally back to normal/unshifted again.
The current mode shift state is displayed on the bottom left corner of the screen on the Aton Connect status line. For Mode 1 shift state, the symbol  will be displayed. For Mode 2 shift state, the symbol  will be
displayed. For the normal/unshifted state, this location on the status line will be blank.
When in Mode 1 or Mode 2 shift state, the keystrokes that normally produce a lower or upper case letter (or
period symbol) will instead produce a terminal emulation function according to the tables listed below. Either a
lower case or upper case letter will produce the same terminal emulation function when in a mode shift state.
Graphic symbols other than the period character will be ignored in the mode shift state.
Note: Not all the terminal functions listed below are meaningful for all emulation types (3270, 5250, VT-220). Terminal functions not meaningful for a particular emulation are ignored.
The following keystrokes with Mode 1 shift convert into terminal functions as described below.
Keystroke |
Terminal Function |
|
"a" or "A"
|
PF1
|
|
"b" or "B"
|
PF2
|
|
"c" or "C"
|
PF3
|
|
"d" or "D"
|
PF4
|
|
"e" or "E"
|
PF5
|
|
"f" or "F"
|
PF6
|
|
"g" or "G"
|
PF7
|
|
"h" or "H"
|
PF8
|
|
"i" or "I"
|
PF9
|
|
"j" or "J"
|
PF10
|
|
"k" or "K"
|
PF11
|
|
"l" or "L"
|
PF12
|
|
"m" or "M"
|
PF13
|
|
"n" or "N"
|
PF14
|
|
"o" or "O"
|
PF15
|
|
"p" or "P"
|
PF16
|
|
"q" or "Q"
|
PF17
|
|
"r" or "R"
|
PF18
|
|
"s" or "S"
|
PF19
|
|
"t" or "T"
|
PF20
|
|
"u" or "U"
|
PF21
|
|
"v" or "V"
|
PF22
|
|
"w" or "W"
|
PF23
|
|
"x" or "X"
|
PF24
|
|
"y or "Y""
|
TEST_REQUEST
|
|
"z" or "Z"
|
SYS_REQUEST
|
|
"." (period, dot)
|
ERROR_RESET
|
|
Backspace
|
RECORD_BACK (Page Up)
|
|
Delete
|
Delete char (hex 7F, dec 127)
|
|
Tab
|
FIELD_BACK (Back Tab)
|
|
Return
|
CURSOR_HOME
|
|
Left Arrow
|
CURSOR_LEFT
|
|
Up Arrow
|
CURSOR_UP
|
|
Right Arrow
|
CURSOR_RIGHT
|
|
Down Arrow
|
CURSOR_DOWN
|
|
|
|
|
The following keystrokes with Mode 2 shift convert into terminal functions as described below.
|
|
|
|
Keystroke |
Terminal Function |
|
"a" or "A"
|
PA1
|
|
"b" or "B"
|
PA2
|
|
"c" or "C"
|
PA3
|
|
"d" or "D"
|
DELETE
|
|
"e" or "E"
|
ATTENTION
|
|
"f" or "F"
|
ERASE_EOF
|
|
"g" or "G"
|
ERASE_INPUT
|
|
"h" or "H"
|
HELP
|
|
"i" or "I"
|
INSERT
|
|
"j" or "J"
|
{unused}
|
|
"k" or "K"
|
DUP_FIELD
|
|
"l" or "L"
|
SCROLL_TO_CURSOR
|
|
"m" or "M"
|
FIELD_MARK
|
|
"n" or "N"
|
PRINT
|
|
"o" or "O"
|
CANCEL_PRINT
|
|
"p" or "P"
|
FIELD_EXIT
|
|
"q" or "Q"
|
SLP_AUTO_ENTER
|
|
"r" or "R"
|
FET_AUTO_ENTER
|
|
"s" or "S"
|
CLEAR
|
|
"t" or "T"
|
FIELD_PLUS
|
|
"u" or "U"
|
FIELD_MINUS
|
|
"v" or "V"
|
ALT_CURSOR
|
|
"w" or "W"
|
FIELD_BACK (Back Tab)
|
|
"x" or "X"
|
BACKSPACE
|
|
"y or "Y""
|
CURSOR_SELECT
|
|
"z" or "Z"
|
HEX
|
|
"." (period, dot)
|
FIELD_ADVANCE (Tab)
|
|
Backspace
|
FIELD_BACK (Back Tab)
|
|
Delete
|
BACKSPACE
|
|
Tab
|
FIELD_BACK (Back Tab)
|
|
Return
|
NEW_LINE
|
|
Left Arrow
|
ROLL_LEFT
|
|
Up Arrow
|
ROLL_UP
|
|
Right Arrow
|
ROLL_RIGHT
|
|
Down Arrow
|
ROLL_DOWN
|
|
|
|
|
The following keystrokes with no Mode shift convert into terminal functions as described below.
|
|
|
|
|
Backspace
|
BACKDELETE
|
|
Delete
|
DELETE
|
|
Tab (Unshifted)
|
FIELD_ADVANCE (Tab)
|
|
Tab (Shifted)
|
FIELD_BACK (Back Tab)
|
|
Return
|
RECORD_ADVANCE (Page Down, Enter)
|
|
Left Arrow
|
Scroll screen left
|
|
Up Arrow
|
Scroll screen up
|
|
Right Arrow
|
Scroll screen right
|
|
Down Arrow
|
Scroll screen down
|
|
